Fence Installation Cost Calculator 2026

How this estimate is calculated

Last pricing review: October 2026. Rates are installed prices per linear foot.

1. New fence = length × material rate. Wood $20 / $35 / $50. Vinyl $30 / $45 / $60. Chain-link $10 / $20 / $30. The wood and vinyl ends are HomeGuide’s published ends. The mids are the averages. Chain-link uses $10–$30. HomeGuide also prints a $9 low in one table and $10–$40 in a later sentence. This calculator does not use $9 or $40. 2. If removal is yes, add length × $10 / $15 / $20. 3. Multiply the sum by 0.90, 1.00, or 1.15. Round to the cent, then to the nearest $100.

Height is not a separate multiplier. A 6-foot privacy fence is the usual reading of the wood and vinyl bands. A much taller fence can cost more, and that difference is not calculated here.

Before requesting quotes

1. Confirm the property line before you accept a length. A survey beats a tape measure across a neighbor’s lawn.
2. Call 811 before digging. Utility marks are not optional.
3. Ask whether one walk gate is included, and how an extra gate or a driveway gate is priced.
4. Ask who pulls the permit, and whether post holes have to reach a frost depth.

Related guide: Fence Installation Cost 2026 covers materials, gates, removal, permits and quote variables. Browse all calculators. Utility locating: Call 811.

Safety

Digging a fence can hit buried utilities. Use 811 and wait for the marks. This calculator does not tell you where the property line is, and it does not tell you to set posts. A fence that blocks sight lines at a driveway can be a traffic problem as well as a code problem.

Questions homeowners ask

Does the price include a gate?

Not as a separate line. A basic walk gate is sometimes inside a contractor’s per-foot bid and sometimes not. Extra gates and automatic openers are listed as not fully captured.

Why is chain-link $10–$30, not $9–$40?

HomeGuide’s material table says about $9–$30, and another sentence says about $10–$40. Using both ends at once would pretend the sources agree. The calculator keeps the tighter $10–$30 band and says so.

Is removal included in the new-fence price?

No. Add it only if the old fence comes out. Replacement is not the same number as new installation plus this removal line; HomeGuide also prints a separate replacement band of about $30–$80 per foot, which this tool does not use.

Does a corner or a slope cost more?

Often, yes. Those conditions are not in the formula. They belong in the written quote.

Sources

• HomeGuide, “How Much Does Fence Installation Cost? (2026),” written by Sarah Noel, February 3, 2026. Wood $20–$50, vinyl $30–$60, chain-link table $9–$30 and a later $10–$40 sentence, removal $10–$20 per foot. https://homeguide.com/costs/fence-installation-cost
• Call 811, for the instruction to have buried utilities marked before digging. Not a price source. https://call811.com/